 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Differential Data and Clock D Flip Flop The MC10EL/100EL52 is a differential data, differential clock D flip-flop with reset. The device is functionally equivalent to the E452 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E452 the EL52 is ideally suited for those applications which require the ultimate in AC performance. Data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. The differential clock inputs of the EL52 allow the device to also be used as a negative edge triggered device. The EL52 employs input clamping circuitry so that under open input conditions (pulled down to VEE) the outputs of the device will remain stable. MC10EL52 MC100EL52 8 1 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 * * * * 365ps Propagation Delay 2.0GHz Toggle Frequency 75k Internal Input Pulldown Resistors >1000V ESD Protection PIN DESCRIPTION PIN D CLK Q FUNCTION Data Input Clock Input Data Output LOGIC DIAGRAM AND PINOUT ASSIGNMENT D1 D Flip-Flop CLK 3 8 VCC TRUTH TABLE D 2 7 Q D L CLK Z Z Q L H 6 Q H CLK 4 5 VEE Z = LOW to HIGH Transition 12/93 (c) Motorola, Inc. 1996 3-1 REV 2 MC10EL52 MC100EL52 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol IEE VEE IIH Characteristic Power Supply Current Power Supply Voltage 10EL 100EL 10EL 100EL -4.94 -4.20 Min Typ 21 21 -5.2 -4.5 Max 25 25 -5.5 -5.5 150 -4.94 -4.20 Min 0C Typ 21 21 -5.2 -4.5 Max 25 25 -5.5 -5.5 150 -4.75 -4.20 Min 25C Typ 21 21 -5.2 -4.5 Max 25 25 -5.5 -5.5 150 -4.75 -4.20 Min 85C Typ 21 24 -5.2 -4.5 Max 25 29 -5.5 -5.5 150 Unit mA V A Input HIGH Current AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol fMAX tPLH tPHL tS tH tPW VPP VCMR Characteristic Maximum Toggle Frequency Propagation Delay to Output Setup Time Hold Time Minimum Pulse Width Minimum Input Swing1 Common Mode Range2 D (10EL) D (100EL) CLK (10EL) CLK (100EL) Output Rise/Fall Times Q (20% - 80%) CLK 125 150 400 150 -0.4 -0.4 -0.6 -0.8 100 225 -1.6 -1.2 See3 See3 350 0 50 125 150 400 150 -0.4 -0.4 -0.6 -0.8 100 225 -1.6 -1.2 See3 See3 350 0 50 125 150 400 150 -0.4 -0.4 -0.6 -0.8 100 225 -1.6 -1.2 See3 See3 350 0 50 125 150 400 150 -0.4 -0.4 -0.6 -0.8 100 225 -1.6 -1.2 See3 See3 350 ps 0 50 ps ps ps mV V Min 1.8 225 Typ 2.5 335 515 Max Min 2.2 275 0C Typ 2.8 365 465 Max Min 2.2 275 25C Typ 2.8 365 465 Max Min 2.2 320 85C Typ 2.8 410 510 Max Unit GHz ps tr tf 1. Minimum input swing for which AC parameters are guaranteed. 2. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin and 1V. 3. The lower end of the CMR range is dependent on VEE and is equal to VEE + 2.5V. MOTOROLA 3-2 ECLinPS and ECLinPS Lite DL140 -- Rev 3 MC10EL52 MC100EL52 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE P -A- B M 8 5 X 45 _ J 1 4 4X -B- M_ G F NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 P 0.25 (0.010) M -T- 8X C SEATING PLANE D 0.25 (0.010) M K TB S A S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com R JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 ECLinPS and ECLinPS Lite DL140 -- Rev 3 3-3 *MC10EL52/D* MC10EL52/D MOTOROLA |
Price & Availability of MC100EL52
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |